Polyarylates. III. Kinetic studies of interfacial polycondensation

The kinetics of interfacial polycondensation of bisphenol A with isophthaloyl chloride and terephthaloyl chloride in dichloromethane with triethylbenzylammonium chloride (TEBAC) as the catalyst was investigated via measurements of bisphenolate concentration by UV. The reaction was found to be second order with respect to bisphenolate. The dependence of the rate constant on stirring speed, amount of TEBAC, and reaction temperature was studied. The rate constant was increased with an increase of stirring speed, quantity of TEBAC added, as well as the reaction temperature. The activation energy was found to be 7.7 kcal/mol at a stirring speed of 700 rpm in the presence of 0.160 of TEBAC. The role of TEBAC was found to be interesting. It did not alter the equilibrium (the partition coefficient remained the same in the presence of TEBAC), but it did enhance the transfer rate of bisphenolate.     

The roles of the rel+ gene and of 4-thiouridine in killing and photoprotection of Escherichia coli by near-ultraviolet radiation

Abstract— Photoprotection is a reduction in response to far-UV (190–300. nm) radiation in cells that have been previously exposed to longer wavelengths. It has been proposed that photoprotection operates by means of a growth delay that permits more time for dark repair. Growth delay in Escherichia coli utilizes 4-thiouridine (⁴Srd) in transfer RNA as a chromophore and it requires the rel⁺ gene, which exerts a stringent control upon RNA synthesis. Mutants that were either rel or ⁴Srd^? were isolated from E. coli B, utilizing a near-UV-induced growth-delay selection technique. The rel mutants, which undergo little growth delay after near-UV irradiation, show only 50% as much photoprotection as wild types, while ⁴Srd^? mutants show no photoprotection at all. Thus, photoprotection appears to utilize ⁴Srd as its sole chromophore in E. coli B and B/r, and no more than 50% of photoprotection in these strains can be a result of near-UV-induced growth delay.     

The Stabilities and Thermodynamic Properties of Manganese(II) and Nickel(II) Chelates of Trans-1,2-Diaminocyclohexane-N,N, N', N'-Tetraacetic Acid

The interaction between trans-1,2-diaminocyclohexane-N, N, N', N'-tetraacetic acid (H₁DCTA or H₄Z) and Mn(II) and Ni(II) ions has been investigated. The formation constants of the hydrogen chelates (MHZ^?), and of the normal chelates (MZ^2?), have been measured at 20, 30 and 40°C, and an ionic strength of 0.10 (KNO₃). The former was done by a titration technique and the latter by a mercury indicator electrode method. Enthalpy and entropy changes characterizing the formation of the normal chelates have been calculated at 25°C.     

High-performance liquid chromatographic determination of 18 alpha-glycyrrhetinic acid and 18 beta-glycyrrhetinic acid in rat plasma: application to pharmacokinetic study.

A high-performance liquid chromatographic method for the separation and determination of 18 alpha-glycyrrhetinic acid and 18 beta-glycyrrhetinic acid has been developed. Indomethacin was used as an internal standard. The drugs were separated on a reversed-phase column and detected by UV detection at a wavelength of 254 nm. Methanol-water-perchloric acid-ammonia (80:20:0.4:0.4, v/v) was used as the mobile phase at pH of 7.0-7.5. The detection limit of both compounds was 0.1 microgram/ml in rat plasma. The method was applied to pharmacokinetic studies of glycyrrhetinic acids in rats. The results suggest that the pharmacokinetics appeared to be non-linear in nature.     

Characterization of glucoamylase immobilized on celite

Immobilization of glucoamylase (EC 3.2.1.3) on Celite R649 bio-catalyst carrier for hydrolysis of maltose and maltodextrin has been investigated in both packed bed and recirculated batch reactors. The kinetics parameters on the hydrolysis of maltose were estimated from the packed bed reactor. It is found that this immobilized enzyme is as efficient as the soluble enzyme in catalyzing hydrolysis of maltose. However, it is less efficient than the soluble enzyme in hydrolyzing 30% (w/v) maltodextrin, giving a maximum dextrose equivalent (DE) value of 96.0% instead of 98.2%.     

Efficient total synthesis of pulchellalactam,a CD45 protein tyrosine phosphatase inhibitor

A new approach to a CD45 protein tyrosine phosphatase inhibitor, pulchellalactam, is described. The key step of the sequence involves addition and elimination of an enolic lactam in a single step and 70% yield, employing an organocuprate reagent. The resulting alpha,beta-unsaturated lactam could be condensed with isobutyraldehyde to produce Z-pulchellalactam or converted into siloxypyrrole, which was subjected to the BF(3) x Et(2)O-promoted coupling reaction with isobutyraldehyde to afford E-pulchellalactam after E1-cB elimination and TFA deprotection. This first total synthesis afforded Z-pulchellalactam in six steps and 32% overall yield from Boc-glycine. The same sequence of reactions could also be applied to the liquid- or solid-phase synthesis of trifunctionalized pulchellalactam derivatives.     

Vertically well aligned P-doped ZnO nanowires synthesized on ZnO-Ga/glass templates

Vertically well aligned P-doped ZnO nanowires were prepared on ZnO-Ga/glass templates at 550 degrees C by reactive evaporation without metal catalysts and the nanowires were found to be single crystalline with the würtzite structure, oriented in the c-axis direction; the P-doping shortened the physical lengths of the ZnO nanowires without changing their diameter, and furthermore, the introduction of P atoms resulted in a much weaker and broader ZnO band edge emission.     

Cooled internal reflection element for infrared chemical sensing of volatile to semi-volatile organic compounds in the headspace of aqueous solutions

In this study, the cooling effect was applied to an evanescent wave type infrared (IR) chemical sensing method to effectively trap volatile organic compounds (VOCs), which have been absorbed in the hydrophobic film coated around the internal reflection element (IRE). The detection of VOCs in aqueous solutions was taken in the headspace of the aqueous solution. This method eliminates the long-term instability of hydrophobic film soaked in an aqueous solution and the potential spectral interference caused by the matrix of the aqueous solution. Thermal energy has been applied to the aqueous solution to assist in the evaporation of VOCs out of the aqueous matrix. By applying a cooling system to the IRE, the excess thermal energy can be removed leading to more stable IR signals. After examination of organic compounds with vapour pressure (P_v) ranging from 0.017 to 150 Torr, significant differences were found between IR signals from cooled and un-cooled systems. Because the thermal conductivity of the IRE used in IR detection is typically low; the efficiency in removing the thermal energy is limited. By heating the aqueous solutions to different temperatures, the IR signals showed that the sample temperature was limited to around 80 °C. The IR signal determination results for five different volatility organic compounds indicated that the optimal heating temperature was not necessary to match with the volatilities of organic compounds in cooling system. The linear regression coefficient (R²) of the standard curve for sample concentrations in the range 5-200 μg ml⁻¹ was generally higher than 0.991 and the detection limit was around a few hundred ng ml⁻¹, which was two to three times lower than that of un-cooled system.     

Tetranuclear and Octanuclear Manganese Carboxylate Clusters: Preparation and Reactivity of (NBu(n)(4))[Mn(4)O(2)(O(2)CPh)(9)(H(2)O)] and Synthesis of (NBu(n)(4))(2)[Mn(8)O(4)(O(2)CPh)(12)(Et(2)mal)(2)(H(2)O)(2)] with a "Linked-Butterfly" Structure

The reaction of Mn(O(2)CPh)(2).2H(2)O and PhCO(2)H in EtOH/MeCN with NBu(n)(4)MnO(4) gives (NBu(n)(4))[Mn(4)O(2)(O(2)CPh)(9)(H(2)O)] (4) in high yield (85-95%). Complex 4 crystallizes in monoclinic space group P2(1)/c with the following unit cell parameters at -129 degrees C: a = 17.394(3) ?, b = 19.040(3) ?, c = 25.660(5) ?, beta = 103.51(1) degrees, V = 8262.7 ?(3), Z = 4; the structure was refined on F to R (R(w)) = 9.11% (9.26%) using 4590 unique reflections with F > 2.33sigma(F). The anion of 4 consists of a [Mn(4)(&mgr;(3)-O)(2)](8+) core with a "butterfly" disposition of four Mn(III) atoms. In addition to seven bridging PhCO(2)(-) groups, there is a chelating PhCO(2)(-) group at one "wingtip" Mn atom and terminal PhCO(2)(-) and H(2)O groups at the other. Complex 4 is an excellent steppingstone to other [Mn(4)O(2)]-containing species. Treatment of 4 with 2,2-diethylmalonate (2 equiv) leads to isolation of (NBu(n)(4))(2)[Mn(8)O(4)(O(2)CPh)(12)(Et(2)mal)(2)(H(2)O)(2)] (5) in 45% yield after recrystallization. Complex 5 is mixed-valent (2Mn(II),6Mn(III)) and contains an [Mn(8)O(4)](14+) core that consists of two [Mn(4)O(2)](7+) (Mn(II),3Mn(III)) butterfly units linked together by one of the &mgr;(3)-O(2)(-) ions in each unit bridging to one of the body Mn atoms in the other unit, and thus converting to &mgr;(4)-O(2)(-) modes. The Mn(II) ions are in wingtip positions. The Et(2)mal(2)(-) groups each bridge two wingtip Mn atoms from different butterfly units, providing additional linkage between the halves of the molecule. Complex 5.4CH(2)Cl(2) crystallizes in monoclinic space group P2(1)/c with the following unit cell parameters at -165 degrees C: a = 16.247(5) ?, b = 27.190(8) ?, c = 17.715(5) ?, beta = 113.95(1) degrees, V = 7152.0 ?(3), Z = 4; the structure was refined on F to R (R(w)) = 8.36 (8.61%) using 4133 unique reflections with F > 3sigma(F). The reaction of 4 with 2 equiv of bpy or picolinic acid (picH) yields the known complex Mn(4)O(2)(O(2)CPh)(7)(bpy)(2) (2), containing Mn(II),3Mn(III), or (NBu(n)(4))[Mn(4)O(2)(O(2)CPh)(7)(pic)(2)] (6), containing 4Mn(III). Treatment of 4 with dibenzoylmethane (dbmH, 2 equiv) gives the mono-chelate product (NBu(n)(4))[Mn(4)O(2)(O(2)CPh)(8)(dbm)] (7); ligation of a second chelate group requires treatment of 7 with Na(dbm), which yields (NBu(n)(4))[Mn(4)O(2)(O(2)CPh)(7)(dbm)(2)] (8). Complexes 7 and 8 both contain a [Mn(4)O(2)](8+) (4Mn(III)) butterfly unit. Complex 7 contains chelating dbm(-) and chelating PhCO(2)(-) at the two wingtip positions, whereas 8 contains two chelating dbm(-) groups at these positions, as in 2 and 6. Complex 7.2CH(2)Cl(2) crystallizes in monoclinic space group P2(1) with the following unit cell parameters at -170 degrees C: a = 18.169(3) ?, b = 19.678(4) ?, c = 25.036(4) ?, beta = 101.49(1) degrees, V = 8771.7 ?(3), Z = 4; the structure was refined on F to R (R(w)) = 7.36% (7.59%) using 10 782 unique reflections with F > 3sigma(F). Variable-temperature magnetic susceptibility studies have been carried out on powdered samples of complexes 2 and 5 in a 10.0 kG field in the 5.0-320.0 K range. The effective magnetic moment (&mgr;(eff)) for 2 gradually decreases from 8.61 &mgr;(B) per molecule at 320.0 K to 5.71 &mgr;(B) at 13.0 K and then increases slightly to 5.91 &mgr;(B) at 5.0 K. For 5, &mgr;(eff) gradually decreases from 10.54 &mgr;(B) per molecule at 320.0 K to 8.42 &mgr;(B) at 40.0 K, followed by a more rapid decrease to 6.02 &mgr;(B) at 5.0 K. On the basis of the crystal structure of 5 showing the single Mn(II) ion in each [Mn(4)O(2)](7+) subcore to be at a wingtip position, the Mn(II) ion in 2 was concluded to be at a wingtip position also. Employing the reasonable approximation that J(w)(b)(Mn(II)/Mn(III)) = J(w)(b)(Mn(III)/M(III)), where J(w)(b) is the magnetic exchange interaction between wingtip (w) and body (b) Mn ions of the indicated oxidation state, a theoretical chi(M) vs T expression was derived and used to fit the experimental molar magnetic susceptibility (chi(M)) vs T data. The obtained fitting parameters were J(w)(b) = -3.9 cm(-)(1), J(b)(b) = -9.2 cm(-)(1), and g = 1.80. These values suggest a S(T) = (5)/(2) ground state spin for 2, which was confirmed by magnetization vs field measurements in the 0.5-50.0 kG magnetic field range and 2.0-30.0 K temperature range. For complex 5, since the two bonds connecting the two [Mn(4)O(2)](7+) units are Jahn-Teller elongated and weak, it was assumed that complex 5 could be treated, to a first approximation, as consisting of weakly-interacting halves; the magnetic susceptibility data for 5 at temperatures >/=40 K were therefore fit to the same theoretical expression as used for 2, and the fitting parameters were J(w)(b) = -14.0 cm(-)(1) and J(b)(b) = -30.5 cm(-)(1), with g = 1.93 (held constant). These values suggest an S(T) = (5)/(2) ground state spin for each [Mn(4)O(2)](7+) unit of 5, as found for 2. The interactions between the subunits are difficult to incorporate into this model, and the true ground state spin value of the entire Mn(8) anion was therefore determined by magnetization vs field studies, which showed the ground state of 5 to be S(T) = 3. The results of the studies on 2 and 5 are considered with respect to spin frustration effects within the [Mn(4)O(2)](7+) units. Complexes 2 and 5 are EPR-active and -silent, respectively, consistent with their S(T) = (5)/(2) and S(T) = 3 ground states, respectively.     

Determinations of geniposide using LC/MS/MS methods via forming ammonium and acetate adducts

In this paper, we report method development work to determine geniposide using LC/MS/MS via the formation of positive and negative ion adducts. Geniposide, which has been recognized to have choleretic effects, is the major iridoid glycoside component of Gardenia herbs. To enhance the sensitivity of LC/MS detection of geniposide, a small amount of volatile additives such as ammonium acetate and acetic acid are added into mobile phase solvents to form positive and negative adducts, which can then ionize via electrospray processes. The formation of positive adducts is due to the complexation between geniposide and ammonium ions ([M + NH₄]⁺). The formation of anionic adducts [M + CH₃COO]⁻ is believed to occur via hydrogen bonds bridging acetate ions and glucose groups on the geniposide molecule. Mobile phase solvents containing acetonitrile and aqueous solution (0.2 mM ammonium acetate or 0.1% acetic acid) at the ratio 15: 85 are employed to elute geniposide using C8 reverse phase liquid chromatography columns with electrospray tandem mass spectrometry determinations. Using geniposide standards, the methods are validated at the concentration ranges of 5 to 1000 ng/mL and 20 to 5000 ng/mL using ammonium and acetate adducts respectively. The correlation coefficients of the standard curves are 0.9999 using both ammonium and acetate adducts. The detection limits of using ammonium and acetate adducts are 1 and 5 ng/mL respectively. The measurement accuracy and precision of using ammonium adducts are within 12% and 3% respectively, whereas the accuracy and precision are within 6 and 11% respectively using acetate adducts. When the validated calibration curves of the ammonium adduct of geniposide are used to determine spiked control samples in rat blood dialysates, the determination errors of accuracy and precision are within 12% and 10% respectively.